POINTS LOAD SUPPORTS DISTANCE
The recommended distance between supports for various SDRs and pipe diameters are shown below. The values shown must be corrected by the temperature correction factors.
Supports Spacing Correction factors:
| Design Temp.[ºc] | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Correction Factor | 1.2 | 1.1 | 1.1 | 1 | 1 | 1 | 0.9 | 0.9 | 0.8 | 0.8 | 0.8 |
